For anyone who plays paintball, having a properly filled air tank is essential. While you can take your tank to a local shop to have it filled, this can be expensive and inconvenient.
A much better option is to fill the tank yourself using an air compressor.Not only will filling your own tank save you money, but it’s also surprisingly easy to do. In just a few minutes, you can have a full paintball tank ready to go.
Plus, by using your own air compressor, you’ll always know exactly how much pressure is in the tank – no more guessing or worrying about whether or not your gun will fire when you need it most!
Table of Contents:
- The Benefits of Filling Your Own Paintball Tank
- Tips for Using an Air Compressor to Fill a Paintball Tank
- Things to Keep in Mind When Filling a Paintball Tank With Air
- FAQs in Relation to How to Fill Paintball Tank With Air Compressor
- Conclusion
The Benefits of Filling Your Own Paintball Tank
If you’re a paintball enthusiast, then you know that having your own air compressor can be a real game-changer. Not only will it save you money on buying CO2 or nitrogen tanks, but you’ll also have complete control over the pressure in your tank.
This means that you can fine-tune the performance of your gun to match your playing style perfectly. Plus, if you fill your own tank using an air compressor, you can be sure that all of your paintballs are evenly pressurized.
This is important because unevenly pressurized balls are more likely to break inside the barrel of your gun – and that could lead to serious injury.
Tips for Using an Air Compressor to Fill a Paintball Tank
Assuming you would like tips for using an air compressor to fill a paintball tank:
- It is important to have the right size air compressor in order to avoid overfilling or damaging the tank.
- Make sure that both the regulator on your compressor and the gauge on your paintball gun are turned all the way off before beginning to fill.
- Begin by slowly opening up valve on your air compressor until you reach desired pressure.
Things to Keep in Mind When Filling a Paintball Tank With Air
When filling a paintball tank with an air compressor, there are a few things to keep in mind. First and foremost, make sure that the air compressor is properly rated for the size of the tank.
You don’t want to overwork your compressor or damage your paintball equipment. Secondly, be careful not to overfill the tank; it should only be filled to about 80% capacity.
This will help ensure that your compressed air is clean and dry when you go to use it. Finally, always use clean, dry compressed air when filling your tanks.
This will help protect your investment and keep your paintballs from being damaged by moisture in the air. This is an edit.
FAQs in Relation to How to Fill Paintball Tank With Air Compressor
Can you fill a paintball tank with a regular air compressor?
Yes, you can fill a paintball tank with an air compressor. All you need is an adapter to connect the two.
You will also need to make sure that your air compressor can generate enough PSI (pounds per square inch) to fill the tank. Most home air compressors can generate around 90-120 PSI, which is plenty for most paintball tanks.
How do you fill a paintball canister with an air compressor?
There are a few ways to fill a paintball canister with an air compressor. The most common way is to use an adapter that goes from the air compressor’s hose fitting to the paintball tank’s valve.
You can also buy a special filler nozzle that attaches directly to the air compressor and has its own gauge so you can monitor the pressure as you’re filling up the tank.
To fill the tank, simply open the valve on the paintball canister and then turn on your air compressor.
Fill it up to the desired pressure (usually around 850 PSI) and then turn off the compressor and close the valve on the tank.
Can 150 psi compressor fill paintball tank?
No, a 150 psi compressor cannot fill a paintball tank. Paintball tanks need to be filled with compressed air to a much higher pressure, typically around 850 psi.
Can you fill a tank with an air compressor?
Yes, you can fill a tank with an air compressor. All you need is an air compressor with the correct PSI and a fill adapter.
Conclusion
Not only will it save you money in the long run, but it’s also much more convenient than having to constantly exchange empty tanks for full ones.
Plus, if you have your own air compressor, you can always make sure that your tank is filled and ready to go whenever you need it.
Here are some tips on how to fill a paintball tank with an air compressor so that you can get the most out of your experience:
1. Make Sure That the Pressure in the Tank Is Released Before Beginning to Fill It.
This can be done by unscrewing the valve at the top of the tank or by simply releasing all of the remaining air inside through use.
2. Connect One End of an Airline Hose Onto the Output Connection on Your Compressor and Screw It Tight So There’s No Chance of Leakage.
Then take the other end and insert it into the filler neck opening on your paintball tank until it tightly seals around the edge of the hole (you may need to use a hose clamp to make sure there is no leakage).3. Slowly open up the air valve on the compressor and let pressurized air flow into the empty tank until it has reached its desired level (usually between 2200-3000psi).
Be very careful not to overfill the tank as there is a danger of explosion if too much pressure builds up inside!4. Once you have achieved the desired pressure level in your tank, quickly disconnect the nozzle from the filler neck opening and screw on cap back in place before any air can escape.
5. Now Your Paintball Tank Equipped With an Air Compressor Is Good to Go!Whenever You Need to Play Just Open the Valve to Release the Pressurized Air Over Time and Spray Away at Home or at a Park.
Air Compressor Total is your one-stop shop for all things air compressor! We can provide you with information on buying, owning, and using an air compressor so that you can make the most out of your purchase. Contact us today to learn more about our services!
Leave a Reply